• Mon to Fri 7.30am to 4.30pm Sat 8am to 12pm
  • Unit 1 32 Enterprise Street, Cleveland, QLD 4163
  • (07) 3286 9077

RULE Bilge Pump 800GPH/3024LPH 24v AUTO

RULE Bilge Pump 800GPH/3024LPH 24v AUTO


3 in stock

SKU: RWB825 Category: Tags: , , , ,


Rule-Mate fully automatic submersible bilge pumps with Rule’s exclusive “Spongeability” feature. All-in-one bilge pump & switch so no float switch required.

The innovative design incorporates the bilge pump and water sensor in a single housing.

Unique Rule “Spongeability” feature leaves the bilge the driest ever – when water in the bilge reaches a certain height the solid state sensor automatically activates and the pump runs until the water is pumped out, reducing boat weight, saving fuel and minimizing bilge odour.

Pump check feature – simply touch the pump check button on the pump and hold for a few seconds to test cycle the pump. These pumps have a threaded discharge port with O ring seal and are supplied with both 20mm 90-degree and straight hose ports.

Available in 12 volt or 24 volt.

3 year limited warranty.

Fully automatic all-in-one submersible bilge pump systems
No separate float switch required
Bilge water sensor and pump in one common housing
Pump and sensor are internally common wired for easy installation
No battery drain other than when the pump is in use
Removable strainer and impeller area are accessible to clear debris
Threaded discharge ports for easy installation
1 each straight and 90 degree hose ports supplied with the pump
A 3rd wire allows for manual over-ride using a Rule switch panel or it can activate an alarm or indicator lamp if desired
Thermal overload protection
Single touch pump check test button feature
All pumps are oval shaped – base footprint size : 110mm x 70mm.
Overall dimensions Inc straight hose port : 190mm L x 80mm W x 115mm H

Your Cart is empty