• Mon - Fri 8.00AM - 5.30PM | Sat 8:00AM – 4:00PM | Sun: Closed
  • (07) 3286 9077


RULE Bilge Pump 500GPH 24V – Manual


3 in stock

SKU: 802 Category: Tags: , , , , ,


Next generation compact submersible 500 GPH electric pump for use as a bilge or bait pump on smaller craft.

Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. This pump is extremely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space.

NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models. 3 year limited warranty.

Fully submersible pump – 500 US gallons per hour – 31 litres per minute
Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
16 gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring
Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge. Note – using the check valve will reduce the rated output flow.
Threaded discharge port – gives easier installation and maintenance.
Discharge hose port is included with each pump
Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
Compact – 99mm Height x 74mm Width x 64mm depth – not including discharge
1 x straight port provided.

You may also like…